List of products by brand SM Project

Retrouvez ici toutes les pièces SM Project pour votre TM Racing, pièces aluminium CNC taillé dans la masse

This category is not filtered - Please select your bike at the top of the website ->

Showing 1-24 of 44 item(s)

CNC parts

SM Project - Brembo master-cylinder cap

€29.90

Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising.

CNC special parts

SM Project - Clutch guard cover 250/300Fi

SM_019

€53.90

CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots.

View

CNC special parts

SM Project - Clutch guard cover 85/125/144

SM_026

€53.90

View

CNC special parts

SM Project - Clutch guard cover 450/530Fi

SM_018

€53.90

OEM Parts

SM Project - Fuel cap Fi 2015/2020

SM_021_Blue

€39.00

CNC machined fuel cap to replace the difficult to access standard item. These machined, anodised fuel caps are a crucial 2mm smaller diameter and 12mm taller than stock resulting much easier to open Suitable for: Tm Racing 250-300 Fi 4stroke 2015/2020Tm Racing 450-530 Fi 2015/2020

CNC parts

SM Project - Brembo master-cylinder cap black

SM-016-black

€29.90

Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising.

View

CNC special parts

SM Project - Ignition guard cover 250/300 2s 19 and +

SM_056

€64.90

CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the lever, rocks or your boots.

CNC parts

copy of SM Project - Brembo master-cylinder cap black

SM-017-SILVER

€29.90

Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising.

CNC parts

copy of SM Project - Brembo master-cylinder cap black

SM-017-SBLUE

€29.90

Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising.

View

CNC special parts

SM Project - Ignition guard cover 250/300Fi

SM_055

€59.90

View

CNC parts

SM Project - Brembo master-cylinder cap

SM_016_E

€24.90

Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising.

CNC special parts

SM Project - Couvercle de filtre à huile SILVER

SM_022_SILVER

€79.90

View

CNC parts

Brake pedal tip XL TM Racing

SM_046_XL_BLUE

€34.90

View

Seat cover

SM Project Wave seat cover 2022/..

SM_013 Wave

€79.90

View

Seat cover

Wave seat cover 2022+ 2-stroke and 4-stroke

SM_012 Wave

€71.91 €79.90

View

Frame guard

Vibram Frame guards Blue TM 2022/..

M7357BLUE

€39.90

Frame guard

Vibram Rubber Frame guards TM Racing (Blue)

M7334B

€39.90

View

CNC special parts

Hi-Flow water impeller kit TM

SM_059

€99.90

View

CNC special parts

SM Project - Clutch guard cover 250/300 2019/..

SM_036

€59.90

CNC special parts

SM Project - Ignition guard cover 450/530Fi

SM_020

€59.90

CNC machined ignition cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the shifter, rocks or your boots.

CNC parts

SM Project - Axle blocks kit 22mm SMX 2012/..

SM_002_BLUE

€69.90

Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery

CNC parts

SM Project - Axle blocks kit 25mm

SM_038

€69.90

Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery

OEM Parts

SM Project - Rear caliper support holder

SM_015_BLUE

€59.90

A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes.

CNC special parts

SM Project - Oil filter cap

SM_022_BLUE

€79.90

CNC machined finned oil filter cover Can be easly installed by replacing it with the original, internal dimensions are same as stock, no modifies required

View