CNC parts SM Project - Brembo master-cylinder cap SM_016 €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
CNC parts SM Project - Axle blocks kit 22mm SMX 2012/.. SM_002_BLUE €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
CNC parts SM Project - Axle blocks kit 25mm SM_038 €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
OEM Parts SM Project - Rear caliper support holder SM_015_BLUE €59.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
OEM Parts SM Project - Fuel cap Fi 2015/2020 SM_021_Blue €39.00 CNC machined fuel cap to replace the difficult to access standard item. These machined, anodised fuel caps are a crucial 2mm smaller diameter and 12mm taller than stock resulting much easier to open Suitable for: Tm Racing 250-300 Fi 4stroke 2015/2020Tm Racing 450-530 Fi 2015/2020 Add to cart
CNC parts SM Project - Rear caliper support holder black SM_015_black €39.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
CNC parts SM Project - Brembo master-cylinder cap black SM-016-black €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
Wheels Front axle puller 2007/.. T-120t €39.00 Front axle puller 100% Made In Italy. Compatible with all TM racing 125 and + 2007 and + Add to cart
Wheels Axle puller kit 2015/.. T-005t €59.00 Set of quick axle pulls on the front and rear wheel axles.100% Made In Italy.Compatible with all TM racing 125 and + 2015 and + Add to cart
CNC parts SM Project - Buffers + wheel kit front TM Racing Blue SM_037_BLUE €39.90 Buffer kit for front wheel axle. Protects the fork leg in the event of a fall. Bar cut in the mass in C45 with treatment. Delrin pads cut in the mass. Centering spacer in anodized 6082 aluminum. Add to cart
CNC parts Brake lever pedal tip TM Racing, SM Project SM_046 €29.90 CNC machined billet pedal tip for TM Racing rear brake lever Greater grip thanks to the insertion of six indestructible stainless steel grains essential in off-road use It keeps the original dimensions, perfectly compatible on: 125-> 660 MX SMR SMX EN from 1999-> Add to cart
CNC parts copy of SM Project - Brembo master-cylinder cap black SM-017-SILVER €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
CNC parts copy of SM Project - Brembo master-cylinder cap black SM-017-SBLUE €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
Wheels Axle puller kit 2015/.. Blue T-005b €59.00 Set of quick axle pulls on the front and rear wheel axles. 100% Made In Italy. Compatible with all TM racing 125 and + 2015 and + Add to cart
TM BOANO Factory Parts TIP FOR BRAKE PEDAL CNC BLUE TM-PNFRNG21 €21.60 Blue anodized CNC brake lever for better braking control. To have a racing look. Add to cart
TM BOANO Factory Parts TIP FOR BRAKE PEDAL CNC BLUE RACE TM-PNFRNB21 €24.60 New Blue anodized CNC RACE brake lever. More impact resistant and with more grip in extreme conditions. Add to cart
TM BOANO Factory Parts REAR BRAKE DISK PROTECTION CNC TM-PDP21B-A €125.90 Fundamental accessory for enduro use of the motorbike. The kit is all made in Ergal and is fully machined. Complete with rear caliper support. MADE IN ITALY Add to cart
TM BOANO Factory Parts BREMBO BLUE TM BRAKE/CLUTCH PUMP COVERS KIT TM-KCPFFB-B €37.78 Blue anodized CNC Brembo brake and clutch master cylinder covers kit for all TM models with Brembo brake and clutch master cylinders. Add to cart
TM BOANO Factory Parts HANDLEBAR PLUGS ANODIZED TM-TAPPI21 €28.52 Handlebar plugs in blue anodized aluminum: light, sturdy and with great visual impact. Add to cart
TM BOANO Factory Parts REAR BRAKE CALIPER SUPPORT TM TM-BLF21BR €59.40 Chain adjuster with extension to lock the rear brake caliper when removing and reassembling the wheel. Allows you to keep the brake caliper in line with the swingarm, making work easier. Made in CNC MADE IN ITALY. Add to cart
